Our Products

CM 9007 INTEGRAL ADMIXTURES

CoatMasters CM 9007 is an admixture for concrete made of advanced silicone emulsions that combines all properties for a desired true waterproofed concrete, water repellency, corrosion protection, original color retention, and protection against efflorescence. Our unique CM 9007 formulation significantly improves mix design properties by helping lower water and cement mix ratio while maintaining excellent workability. For more information about this product, please contact our technical representatives.

CONCRETE      
GFRC      

CM9007 Integral Waterproofing Admixture

TDS 9007

SDS 9007

CM 2007/3007 IMPREGNATING/PENETRATING SEALERS

CoatMasters as hidden defenders in protecting construction materials.

CoatMasters products are composed of environmentally friendly silicone modified emulsions designed for long term protection of construction materials against the destructive impacts of humidity, water penetration and chloride ions. This new waterborne silicone emulsion formulation can now perform extremely well as compared to traditional solvent borne coatings. Our impregnating or penetrating sealers has long term resistance to water penetration, and resists color change which is very ideal on constant or long-term water exposure condition, requiring excellent waterproofing of the surface.

CoatMasters Non Sacrificial Coating - Anti Garffiti (NSC-AG) is a penetrating and permanet type of coating designed to withstand any type of grafitti from other sources, such as markers, paint type materials, and other waterbased or solventbased types of coating. Removal of these types of graffiti or foreign material will be dependent on the degree of adhesion and curing onto the surface, and will normally require standard pressure washing with or without the aid of cleaning solutions, such as abrasives, coating or paint removers, and/or paint strippers when necessary.

Note: Use of this type of products, may require use of CoatMasters Paint Removers for effective results. Please consult our CoatMasters Technical Service Group for assistance

       

CM2007 Waterproofing Sealer (Penetrating System)

TDS 2007

SDS 2007

CM2007 NSC-AG, Non Sacrificial Coating - Anti-Graffiti (Penetrating and Permanent System)

TDS 2007 NSC-AG

SDS 2007 NSC-AG

CM3007 Waterproofing Sealer (Penetrating System)

TDS 3007

SDS 3007

 

CM GLOSS & CM MATTE FILM FORMING/TOPICAL SEALERS

Durable performance of CoatMasters film forming sealers for coatings on any cementitious type surfaces. 

Our new CoatMasters Gloss and Matte Sealers are designed to protect concrete from traditional stains. The film properties provide hard film build-up, hydrolytic (water resistance), UV resistance, and additional anti-graffiti protection. The film quickly dries, and already "dry-to-touch" in less than 5-minutes, which is immediately recoatable for additional film build-up, if needed. Multiple coatings applied exhibits "dry-hard" condition in 1-2 hours, which translates to "thorough dry" conditions in about 24 hours. Our CoatMasters "Gloss" imparts a wet look finish, and the CoatMasters "Matte" provides a low sheen effect which contains a hydrophobic matting agent.

CoatMasters sealers easily meets ASTM C-309 for "Liquid Membrane-Forming Compounds for Curing Concrete"

Type 1 - Clear, "CoatMasters Gloss Sealer
Type 2 - White Pigmented "CoatMasters Matte Sealer

 Meets SCAQMD (Maximum: 100 grams/liter) limit for Volatile Organic Components for sealers

       

Standard CoatMasters Matte & Gloss Sealers

TDS

SDS Matte

SDS Gloss

DOT Approved Sacrificial Coating - Anti Graffi

California (CalTrans), Virginia, North Carolina, South Carolina,

Georgia, Florida

TDS

SDS

 

CM ELASTOMERIC COATING

Weatherability performance of CoatMasters Elastomeric Coatings can be applied on any cementitious type surfaces. 

Our Elastomeric Coatings are specifically designed to withstand water permeability and provides elongational elasticity caused by structural movements and elemental conditions. The film quickly dries in 24-hours and already "dry-to-touch" in less than 30-minutes, which is immediately recoatable for additional film build-up, if needed. Multiple coatings applied exhibits "dry-hard" condition in 24-48 hours, which translates to "thorough dry" conditions in about 72 hours. Our Elastomeric Coatings comes in different type of finishes, such as gloss, semi-gloss, satin, and flat. All finishes are tintable and can be color matched into any type of color standards.

This green product contains a minimum of 50% post consumer material that is adjusted and reformulated to achieve the desired performance characteristics. It qualifies for various LEED points for recycled contents and low emitting material based on standard classification under the SCAQMD (Maximum: 250 grams/liter) limit for Volatile Organic Components.

       

CM Elastomeric Coating

TDS

SDS

CM GLOSS

CM 7007 DAMPPROOF & WATERPROOF COATING

Moisture and water resistance of CoatMasters Dampproof & Waterproof Coatings can easily withstand 7-days of complete water submerssion. 

Our Dampproof & Waterproof Coatings are formulated to provide excellent surface water protection, abrasive resistant, and can be applied on multiple coats exhibiting consistent performance characteristics. The film quickly dries in 24-hours and already "dry-to-touch" in less than 60-minutes, which is immediately recoatable for additional film build-up, if needed. Multiple coatings applied exhibits "dry-hard" condition in 24-48 hours, which translates to "thorough dry" conditions in about 72 hours. Our Dampproof & Waterproof Coating only comes in flat and gray-black color variation, and can be color tinted to match various shades of dark gray colors.

This green product contains a minimum of 50% post consumer material that is adjusted and reformulated to achieve the desired performance characteristics. It qualifies for various LEED points for recycled contents and low emitting material based on standard classification under the SCAQMD (Maximum: 250 grams/liter) limit for Volatile Organic Components.

       

CM7007 Dampproof & Waterproof Coating

TDS 7007

SDS 7007

 

CM 6007 EPOXY COATING

High Performance and High Solids coatings designed for long-term water and chemical exposure resistance from strong acids and alkaline materials subjected to high hydrostatic pressure are easily withstand with highly-cross linked molecular epoxides cured with various curing agents.

Our epoxy coatings are specifically formulated for definitive applications for use on both interior and exterior applications, for above and below ground coating reuirements. Ffilled cured systems are available to help fill voids and provides excellent abrasion resistance, essential in fortifying or levelling uneven or casted surfaces. Designed with various curing agents, specific curing times and pot-lifes are established, depending on desired film-dry and service condition properties.

The CM6007 series of epoxy coatings are formulated based on 1:1 by volume for ease of mixing and handling and can be supplied in full pail or kit packaging quantities. Based on high solids system, the supplied product is VOC compliant and can be further reduced using any exempt EPA solvents.

       

CM 6007 HS

(Bis A-High Solids-Polyamide Filled System)

TDS 6007HS

SDS 6007HS

CM 6007 HP

(Bis F- High Performance Polyamide Filled System)

TDS 6007HP

SDS 6007HP

CM 6007 HS NOVO

(Bis-F Novolac-Polyamine Filled System)

TDS 6007HS NOVO

SDS 6007HS NOVO

Contact Us

Corporate Headquarter
IMRAE CORPORATION
41725 Elm St., Suite 202
Murrieta, CA 92562

Tel: (951) 413-0240
Fax: (951) 413-0241
Email: info@imrae.com

CM IMPREGNATING CM GLOSS